| |
|
|
|
MODEL : M1-100A
Digital Visual Interface
is a high-quality, uncompressed data link between a host processor video card
and a display peripheral. Optical technology stretches the performance beyond
copper cable extension, security, negligible RFI/EMI and the elimination of
costly analog distribution systems. The M1-100A Express
DVI Graphic Extension Cable consists of a transmitter and a receiver, connected
by a rugged sheath containing glass optical fibers, with male DVI-D connectors
at each end. All modules are designed and manufactured by Opticis with 850nm VCSEL
and PIN-PD arrays from its in-house fabrication process.The Express M1-100A transmits
Red, Green, Blue, and Clock TMDS graphic data over fiber. Its transmitter provides
self-programming of EDID parameters by attaching it to the monitor before
installing, which enable running DDC without physical connection.An external power adapter is
required for the receiver, while most video cards can provide +5VDC power to
the transmitter. The Tx and Rx modules
are clearly labeled to prevent reverse installation of the cable.
The
M1-100A is designed to program itself the EDID parameters by plugging the
powered transmitter to the monitor before installing, which enables graphic cards
recognize the monitor in a right way without any physical connection for DDC.
Features
-Supports all VESA resolutions up to WUXGA
(1,920x1,200), at 60Hz refresh rate with 1 pixel/clock mode. Maximum
Single-Link DVI rate of 165 Mpixels/sec.
-Embedded glass optical fiber-only distribution
cable with 4 strands Multimode Glass of fibers only for the TMDS video
interface with perfect electrical isolation.
-Enables graphic cards recognize the
monitor EDID without any physical connection for DDC, that is, offering
self-programming onto the transmitter by plugging it to the monitor.
-Extends
up to 500 meters
(1,640 feet).
-Both modules are capable of receiving
+5V externally if not available through the connector interface. If both provided, power contention circuitry
will prevent voltage conflict.
-No software to install - just plug and
go on PC and Apple systems.
-Data security with negligible RFI/EMI emissions and loss
of video quality due to no copper conductors present.
Applications
-Ideal for medical, military, aerospace,
factory automation and traffic control system integrations.
-Digital
FPD, PDP and projector installation in conference rooms, auditoriums and kiosk
systems.
-LED signboards for large scale information
displays.
-Professional broadcast studios.
Order & Further Information
For product information and sales, please call MJ Int. Ltd. or write to the below address.
Visit our Web Site at www.MJint.biz or send E-Mail to mjint@mjint.biz.
[Click Here] to check the latest prices and availability of this product
|
|
MJ INT.Ltd., University of Warwick Science Park, B.V. Centre,Sir William Lyons Road,Coventry, UK CV4 7EZ
Tel : +44(0)2476-323-191 Fax : +44(0)2476-849-232 email : mjint@mjint.biz
|
|
|
