| |
|
|
|
|
DVI Optical Extension Solution - Optical DVI Extenders
Fiber-optic interconnection of digital graphic data, complying with DVI (Digital Visual Interface) enables data transmission of high-quality and cost effectiveness of integrated display systems. The DVI interface is a industry standard of digital graphic transmission protocol, supervised by DDWG (Digital Display Working Group), supporting TMDS (Transit Minimized Differential Signal) graphic transmission and implementing DDC (Display Data Control) for CPU to identify displays. It also applies for HDCP (High Definition Contents Protection) in DTV system.
Our DVI products consist of a transmitter having 850nm VCSEL array inside and a receiver having PIN-Photo Diode array inside. They support WUXGA (1920x1200) graphic resolution at 60Hz refresh rate.
It can simply extend over the limits of copper wire extension without any distribution amplifier or repeater. In addition, the products could offer a benefit to make electrical separation between graphic sources and display ends.
|
|
|
|
|
|
DVI Optical Extension
| 
|
|
|
|
| M1-1000
|
M1-100A
|
M1-1PO
|
M1-201SA-TR
|
| |
|
|
|
| 
|
|
|
|
| M1-2DH
|
M1-2R2VI-DU
|
M5-2000
|
M1-2R2
|
M1-1P0 point-to-point hybrid cable is designed to transmit
graphic data over fiber, but interconnect DDC and DC power for the transmitting
and receiving modules over copper wires.
M1-1000
point-to-point fiber cable implements DDC/HDCP interconnection as well as 4
channel graphic data (Red, Green, Blue, Clock) into fiber-optic technology,
using 8 fibers cable.
M1-100A point-to-point fiber cable
implements 4 channel graphic data (Red, Green, Blue, Clock) into fiber-optic
technology and OPTICIS unique Virtual DDC, programming with a programming kit,
Opticis has specified.
M1-201SA fiber detachable module
adopts two duplex LC patch cord fibers to transmit only 4 channels graphic data
with self EDID programming feature.
M1-2R2-TR fiber/copper
detachable module adopts RJ-45C UTP cable for DDC/HDCP interconnection as well
as two duplex LC patch cord fibers to transmit the graphic
data.
M1-2R2VI-DU fiber/copper detachable module adopts
RJ-45C UTP cable for DDC/HDCP interconnection as well as four duplex LC patch
cord fibers to transmit Dual DVI signal.
M5-2000/2001
fiber optic DVI transmitter and repeater modules make DVI daisy-chain over
multi-mode LC duplex patch cord.
|
|
| MJ INT.Ltd., University of Warwick Science Park, B.V. Centre,Sir William Lyons Road,Coventry, UK CV4 7EZ
Tel : +44(0)2476-323-191 Fax : +44(0)2476-849-232 email : mjint@mjint.biz
©2007 MJ Int Ltd - DVI Optical Extension Solution - Optical DVI Extenders
|
|
|
